| Code | Model |
| 10519 | 3/8” UNF x 16 mm |
| 10520 | 3/8” UNF x 25 mm |
| 10521 | Ø 10 x 20 mm |
| 10522 | Ø 12 x 20 mm |
| 10523 | Ø 13 x 20 mm |
| 10524 | Ø 14 x 15 mm |
| 10530 | Per gambo Ø 3 mm / For Ø 3 mm shaft |
| 10531 | Per gambo Ø 5 mm / For Ø 5 mm shaft |
| 10532 | Per gambo Ø 6 mm / For Ø 6 mm shaft |
| 10532-1 | Per gambo Ø 6,35 mm (1/4″) / For Ø 6,35 mm (1/4″) |
| 10533 | Per gambo Ø 8 mm / For Ø 8 mm shaft |
| 10534 | Per gambo Ø 10 mm / For Ø 10 mm shaft |
| 10536 | Per scorticatori OTR 1/2″ x 16 mm / For OTR gouges 1/2″ x 16 mm |
| 10537 | Ø 12 x 25 mm (per raspetta / for rasp 11578) |
| 10538 | Per raspa R6 / For R6 rasp |
| 10539 | Per spazzole / For brushes 11435 – 11436 |
| 10540 | Per spazzole / For brushes 11437 – 11438 |
| 10560 | Per scorticatore 10466 / For gouge 10466 |
| 10541 | Mandrino con flange (modello Recamic) / Chuck with flanges (Recamic model) |
| 10544 | Mandrino con flange (modello Continental) / Chuck with flanges (Continental model) |
| 10542 | Per ruote in gomma 14656 – 14657 / For rubber wheels 14656 – 14657 |
| 10528 | Per UG1250 16 mm / For UG1250 16 mm |
| 10529 | Per raspetta a punte 11578 e UG1250/ For pin raps 11578 e UG1250 |
#10519
#10520
#10524
#10537
hex adapters
#10540
#10539
#10541 RECAMIC
10544
#10542
#10523
#10560
#10536
10528
10529
adapters chart
Gambi esagonali
Gambi esagonali di varie misure e compatibili con accessori come: raspette a punte, frese, mole in silicio, mole carbide.
