| Model | Belt Strength | Min pulley Ø | Belt Thickness | Belt Width |
| H35AE | Up to 1050 kN/m | 250 mm | 6-9 mm | Up to 650 mm
Up to 800 mm Up to 900 mm Up to 1000 mm Up to 1050 mm Up to 1200 mm Up to 1350 mm Up to 1400 mm Up to 1600 mm |
| H35BE | Up to 1050 kN/m | 250 mm | 7-11 mm | |
| H37AE | Up to 1400 kN/m | 350 mm | 8-12 mm | |
| H37BE | Up to 1400 kN/m | 350 mm | 10-14 mm | |
| H67CE | Up to 1800 kN/m | 500 mm | 12-16 mm | |
| H67DE | Up to 1800 kN/m | 500 mm | 15-18 mm |
H30BS
H30
HACKSAW
HTA + 11115ù
hammer HM
HD Fasteners
The HD Fasteners are meant for high tensile belts with thickness between 6 mm and 18 mm. They are available in 6 models and in Stainless Steel:
The connecting pins need to be ordered separately https://vmrubber.com/en/p/pins-for-hd-fasteners/.
These fasteners are installed by using the HTA H30 or HTA H60 installation units (https://vmrubber.com/en/p/hta-installation-unit/) and with the accessories displayed at the Mato Accessories page https://vmrubber.com/en/p/mato-accessories/. The HM Hammer #11114, the pneumatic hammer #11115,the lacing head HK #11116 or 11117, the belt skiver #11119 and the hacksaw #11118.
