Fasteners for Hay Baler

The Mato fasteners for Hay Baler Belts are available in the U24 and H24 models.

The U24 fastener is suitable for belt in the range of 4-7 mm thickness. It is installed by using a bench vice, a hammer and the installation tool Profi U24 (https://vmrubber.com/en/p/u24-installation-tool/).

The H24 fastener is suitable for belt in the range of 5-6 mm thickness. It is hammer installed and using the installation tool Profi H24 (https://vmrubber.com/en/p/h24-installation-tool/).

All packing units include connecting pins whereas otherwise indicated: *available without connecting pins / ** available only without connecting pins. To inquire please use the model code and the belt width.

MODEL U24BS	MODEL U24CS	MODEL U24AS	MODEL H24BS	Up to 520 kN/m
Belt Thickness 5.0-6.0 mm	Belt Thickness 6.0-7.0 mm	Belt Thickness 4.0-5.0 mm	Belt Thickness 5.0-6.0 mm	Min pulley Ø 75
Belt width mm	Belt width mm	Belt width mm	Belt width mm	Packing units
100-110	100-110		100-110	12
111-121	111-121		111-121	12
120-130**				12
122-132	122-132		122-132	12
133-143	133-143		133-143	12
144-154	144-154		144-154	12
155-165*	155-165	155-165	155-165	12
166-176*	166-176		166-176	12
177-187*	177-187		177-187*	12
188-198*	188-198*	188-198*	188-198*	12
199-209	199-209		199-209	10
210-220*	210-220*		210-220*	10
221-231*	221-231*	221-231*	221-231*	10
232-242	232-242		232-242	10
232-250**				8
243-253	243-253		243-253	8
254-264	254-264		254-264	8
265-275	265-275		265-275	8
276-286*	276-286*		276-286*	8
287-297	287-297		287-297	8
298-308*	298-308		298-308*	8
309-319	309-319		309-319	8
320-330	320-330		320-330	8
331-341	331-341		331-341	8
342-352	342-352		342-352	8
353-363	353-363	353-363	353-363*	8 (6 H24*)
364-374*	364-374		364-374	8
375-385*	375-385		375-385	8